• Connection String Options

Connection String OptionsBack To Top

1. AuthScheme
2. Domain
3. AWSAccessKey
4. AWSSecretKey
5. AWSRoleARN
6. AWSRegion
7. AWSCredentialsFile
8. AWSCredentialsFileProfile
9. AWSSessionToken
10. AWSExternalId
11. MFASerialNumber
12. MFAToken
13. CredentialsLocation
14. TemporaryTokenDuration
15. AWSCognitoRegion
16. AWSUserPoolId
17. AWSUserPoolClientAppId
18. AWSUserPoolClientAppSecret
19. AWSIdentityPoolId
20. User
21. Password
22. SSOLoginURL
23. SSOProperties
24. SSOExchangeUrl
25. SSLServerCert
26. FirewallType
27. FirewallServer
28. FirewallPort
29. FirewallUser
30. FirewallPassword
31. ProxyAutoDetect
32. ProxyServer
33. ProxyPort
34. ProxyAuthScheme
35. ProxyUser
36. ProxyPassword
37. ProxySSLType
38. ProxyExceptions
39. Logfile
40. Verbosity
41. LogModules
42. MaxLogFileSize
43. MaxLogFileCount
44. Location
45. BrowsableSchemas
46. Tables
47. Views
48. AutoCache
49. CacheDriver
50. CacheConnection
51. CacheLocation
52. CacheTolerance
53. Offline
54. CacheMetadata
55. AutoDetectIndex
56. BatchSize
57. ConnectionLifeTime
58. ConnectOnOpen
59. FlattenArrays
60. FlattenObjects
61. FlexibleSchema
62. GenerateSchemaFiles
63. IgnoreTypes
64. MaximumRequestRetries
65. MaxRows
66. Other
67. Pagesize
68. PoolIdleTimeout
69. PoolMaxSize
70. PoolMinSize
71. PoolWaitTime
72. PseudoColumns
73. Readonly
74. RetryWaitTime
75. RowScanDepth
76. RTK
77. SeparatorCharacter
78. SupportEnhancedSQL
79. ThreadCount
80. Timeout
81. TypeDetectionScheme
82. UseBatchWriteItemOperation
83. UseConnectionPooling
84. UseConsistentReads
85. UseSimpleNames

AuthScheme

Data Type

string

Default Value

"Auto"

Remarks

Use the following options to select your authentication scheme:

• Auto: Set this to have the driver attempt to automatically resolve the proper authentication scheme to use based on the other connection properties specified.
• TemporaryCredentials: Set this to leverage temporary security credentials alongside a session token to connect.
• AwsRootKeys: Set this to use the root user access key and secret. Useful for quickly testing, but production use cases are encouraged to use something with narrowed permissions.
• AwsIAMRoles: Set to use IAM Roles for the connection.
• AwsEC2Roles: Set this to automatically use IAM Roles assigned to the EC2 machine the CData JDBC Driver for Amazon DynamoDB is currently running on.
• AwsMFA: Set to use multi factor authentication.
• Okta: Set to use a single sign on connection with OKTA as the identity provider.
• ADFS: Set to use a single sign on connection with ADFS as the identity provider.
• PingFederate: Set to use a single sign on connection with PingFederate as the identity provider.
• AwsCredentialsFile: Set to use a credential file for authentication.
• AwsCognitoSrp: Set to use Cognito based authentication. This is recommended over AwsCognitoBasic because this option does NOT send the password to the server for authentication, instead it uses the SRP protocol.
• AwsCognitoBasic: Set to use Cognito based authentication.

Domain

Data Type

string

Default Value

"amazonaws.com"

Remarks

If you do not have a unique AWS domain name, leave this value specified as amazonaws.com.

AWSAccessKey

Data Type

string

Default Value

""

Remarks

Your AWS account access key. This value is accessible from your AWS security credentials page:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number and select My Security Credentials in the menu that is displayed.
3. Click Continue to Security Credentials and expand the Access Keys section to manage or create root account access keys.

AWSSecretKey

Data Type

string

Default Value

""

Remarks

Your AWS account secret key. This value is accessible from your AWS security credentials page:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number and select My Security Credentials in the menu that is displayed.
3. Click Continue to Security Credentials and expand the Access Keys section to manage or create root account access keys.

AWSRoleARN

Data Type

string

Default Value

""

Remarks

When authenticating outside of AWS, it is common to use a Role for authentication instead of your direct AWS account credentials. Entering the AWSRoleARN will cause the CData JDBC Driver for Amazon DynamoDB to perform a role based authentication instead of using the AWSAccessKey and AWSSecretKey directly. The AWSAccessKey and AWSSecretKey must still be specified to perform this authentication. You cannot use the credentials of an AWS root user when setting RoleARN. The AWSAccessKey and AWSSecretKey must be those of an IAM user.

AWSRegion

Data Type

string

Default Value

"NORTHERNVIRGINIA"

Remarks

The hosting region for your Amazon Web Services. Available values are OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, TOKYO, CENTRAL, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, STOCKHOLM, BAHRAIN, SAOPAULO, GOVCLOUDEAST, and GOVCLOUDWEST.

AWSCredentialsFile

Data Type

string

Default Value

""

Remarks

The path to the AWS Credentials File to be used for authentication. See https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-files.html for more information.

AWSCredentialsFileProfile

Data Type

string

Default Value

"default"

Remarks

The name of the profile to be used from the supplied AWSCredentialsFile. See https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-files.html for more information.

AWSSessionToken

Data Type

string

Default Value

""

Remarks

Your AWS session token. This value can be retrieved in different ways. See this link for more info.

AWSExternalId

Data Type

string

Default Value

""

Remarks

A unique identifier that might be required when you assume a role in another account.

MFASerialNumber

Data Type

string

Default Value

""

Remarks

You can find the device for an IAM user by going to the AWS Management Console and viewing the user's security credentials. For virtual devices, this is actually an Amazon Resource Name (such as arn:aws:iam::123456789012:mfa/user).

MFAToken

Data Type

string

Default Value

""

Remarks

If MFA is required, this value will be used along with the MFASerialNumber to retrieve temporary credentials to login. The temporary credentials available from AWS will only last up to 1 hour by default (see TemporaryTokenDuration). Once the time is up, the connection must be updated to specify a new MFA token so that new credentials may be obtained.

CredentialsLocation

Data Type

string

Default Value

"%APPDATA%\\CData\\AmazonDynamoDB Data Provider\\CredentialsFile.txt"

Remarks

MFA credentials are short lived and typically expire after an hour. At that point, a different MFAToken must be specified to continue connecting. MFA tokens only work once, so in the case of multi-threaded or multi-process applications, the credentials must be centrally located and shared to avoid problems. When MFAToken is not specified, this property does nothing.

If left unspecified, the default location is "%APPDATA%\\CData\\AmazonDynamoDB Data Provider\\CredentialsFile.txt" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Mac	~/Library/Application Support
Linux	~/.config

MFA credentials are short lived and typically expire after an hour. At that point, a different MFAToken must be specified to continue connecting. MFA tokens only work once, so in the case of multi-threaded or multi-process applications, the credentials must be centrally located and shared to avoid problems. When MFAToken is not specified, this property does nothing.

If left unspecified, the default location is "%APPDATA%\\CData\\AmazonDynamoDB Data Provider\\CredentialsFile.txt" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Mac	~/Library/Application Support
Linux	~/.config

TemporaryTokenDuration

Data Type

string

Default Value

"3600"

Remarks

Temporary tokens are used with both MFA and Role based authentication. Temporary tokens will eventually time out, at which time a new temporary token must be obtained. For situations where MFA is not used, this is not a big deal. The CData JDBC Driver for Amazon DynamoDB will internally request a new temporary token once the temporary token has expired.

However, for MFA required connection, a new MFAToken must be specified in the connection to retrieve a new temporary token. This is a more intrusive issue since it requires an update to the connection by the user. The maximum and minimum that can be specified will depend largely on the connection being used.

For Role based authentication, the minimum duration is 900 seconds (15 minutes) while the maximum if 3600 (1 hour). Even if MFA is used with role based authentication, 3600 is still the maximum.

For MFA authentication by itself (using an IAM User or root user), the minimum is 900 seconds (15 minutes), the maximum is 129600 (36 hours).

AWSCognitoRegion

Data Type

string

Default Value

"NORTHERNVIRGINIA"

Remarks

The hosting region for AWS Cognito. Available values are OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, TOKYO, CENTRAL, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, STOCKHOLM, BAHRAIN, SAOPAULO, GOVCLOUDEAST, and GOVCLOUDWEST.

AWSUserPoolId

Data Type

string

Default Value

""

Remarks

You can find this in AWS Cognito -> Manage User Pools -> select your user pool -> General settings -> Pool Id.

AWSUserPoolClientAppId

Data Type

string

Default Value

""

Remarks

You can find this in AWS Cognito -> Manage Identity Pools -> select your user pool -> General settings -> App clients -> App client Id.

AWSUserPoolClientAppSecret

Data Type

string

Default Value

""

Remarks

You can find this in AWS Cognito -> Manage Identity Pools -> select your user pool -> General settings -> App clients -> App client secret.

AWSIdentityPoolId

Data Type

string

Default Value

""

Remarks

You can find this in AWS Cognito -> Manage Identity Pools -> select your identity pool -> Edit identity pool -> Identity Pool Id

User

Data Type

string

Default Value

""

Remarks

Together with Password, this field is used to authenticate in SSO connections against the Amazon DynamoDB server.

Password

Data Type

string

Default Value

""

Remarks

The User and Password are together used in SSO connections to authenticate with the server.

SSOLoginURL

Data Type

string

Default Value

""

Remarks

The identity provider's login URL.

SSOProperties

Data Type

string

Default Value

""

Remarks

Additional properties required to connect to the identity provider in a semicolon-separated list. SSOProperties is used in conjunction with the the AWSRoleARN and AWSPrincipalARN. The following section provides an example using the OKTA identity provider.

Authenticating with ADFS

Set the AuthScheme to ADFS. The following connection properties need to be set:

• User: Set this to the ADFS user.
• Password: Set this to ADFS password for the user.
• SSOLoginURL: Set this to the login url used by the SSO provider.

Below is an example connection string:

AuthScheme=ADFS; AWSRegion=Ireland; User=user@cdata.com; Password=CH8WerW121235647iCa6; SSOLoginURL='https://adfs.domain.com'; AWSRoleArn=arn:aws:iam::1234:role/ADFS_SSO; AWSPrincipalArn=arn:aws:iam::1234:saml-provider/ADFSProvider; S3StagingDirectory=s3://athena/staging;

ADFS Integrated

The ADFS Integrated flow indicates you are connecting with the currently logged in Windows user credentials. To use the ADFS Integrated flow, simply do not specify the User and Password, but otherwise follow the same steps in the ADFS guide above.

Authenticating with Okta

Set the AuthScheme to Okta. The following connection properties are used to connect to Okta:

• User: Set this to the Okta user.
• Password: Set this to Okta password for the user.
• SSOLoginURL: Set this to the login url used by the SSO provider.

The following SSOProperties are needed to authenticate to Okta:

• APIToken (optional): Set this to the API Token that the customer created from the Okta org. It should be used when authenticating a user via a trusted application or proxy that overrides OKTA client request context.
• MFAType (optional): Set this only in case you have configured MFA flow. Currently we support only the follwoing types: OktaVerify,Email and SMS.
• MFAPassCode (optional): Set this only in case you have configured MFA flow. If this is set to empty/invalid the driver will initially issue a MFA challenge which will trigger the platform to send you an one-time password on your device or email, based on the configured MFA type. You need to re-issue another connection where the retrieved one-time password value is passed to MFAPassCode connection property.

The following is an example connection string:

AuthScheme=Okta; AWSRegion=Ireland; User=user@cdata.com; Password=CH8WerW121235647iCa6; SSOLoginURL='https://cdata-us.okta.com/home/amazon_aws/0oa35m8arsAL5f5NrE6NdA356/272'; SSOProperties='ApiToken=01230GGG2ceAnm_tPAf4MhiMELXZ0L0N1pAYrO1VR-hGQSf;'; AWSRoleArn=arn:aws:iam::1234:role/Okta_SSO; AWSPrincipalARN=arn:aws:iam::1234:saml-provider/OktaProvider; S3StagingDirectory=s3://athena/staging;

SSOExchangeUrl

Data Type

string

Default Value

""

Remarks

The CData JDBC Driver for Amazon DynamoDB will use the url specified here to consume a SAML response and retrieve Amazon DynamoDB specific credentials. The retrieved credentials are the final piece during the SSO connection that are used to communicate with Amazon DynamoDB.

SSLServerCert

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description	Example
A full PEM Certificate (example shortened for brevity)	-----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate	C:\cert.cer
The public key (example shortened for brevity)	-----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated)	ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated)	34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

FirewallType

Data Type

string

Default Value

"NONE"

Remarks

This property specifies the protocol that the driver will use to tunnel traffic through the FirewallServer proxy. Note that by default, the driver connects to the system proxy; to disable this behavior and connect to one of the following proxy types, set ProxyAutoDetect to false.

Type	Default Port	Description
TUNNEL	80	When this is set, the driver opens a connection to Amazon DynamoDB and traffic flows back and forth through the proxy.
SOCKS4	1080	When this is set, the driver sends data through the SOCKS 4 proxy specified by FirewallServer and FirewallPort and passes the FirewallUser value to the proxy, which determines if the connection request should be granted.
SOCKS5	1080	When this is set, the driver sends data through the SOCKS 5 proxy specified by FirewallServer and FirewallPort. If your proxy requires authentication, set FirewallUser and FirewallPassword to credentials the proxy recognizes.

To connect to HTTP proxies, use ProxyServer and ProxyPort. To authenticate to HTTP proxies, use ProxyAuthScheme, ProxyUser, and ProxyPassword.

FirewallServer

Data Type

string

Default Value

""

Remarks

This property specifies the IP address, DNS name, or host name of a proxy allowing traversal of a firewall. The protocol is specified by FirewallType: Use FirewallServer with this property to connect through SOCKS or do tunneling. Use ProxyServer to connect to an HTTP proxy.

Note that the driver uses the system proxy by default. To use a different proxy, set ProxyAutoDetect to false.

FirewallPort

Data Type

int

Default Value

0

Remarks

This specifies the TCP port for a proxy allowing traversal of a firewall. Use FirewallServer to specify the name or IP address. Specify the protocol with FirewallType.

FirewallUser

Data Type

string

Default Value

""

Remarks

The FirewallUser and FirewallPassword properties are used to authenticate against the proxy specified in FirewallServer and FirewallPort, following the authentication method specified in FirewallType.

FirewallPassword

Data Type

string

Default Value

""

Remarks

This property is passed to the proxy specified by FirewallServer and FirewallPort, following the authentication method specified by FirewallType.

ProxyAutoDetect

Data Type

bool

Default Value

false

Remarks

This takes precedence over other proxy settings, so you'll need to set ProxyAutoDetect to FALSE in order use custom proxy settings.

NOTE: When this property is set to True, the proxy used is determined as follows:

• A search from the JVM properties (http.proxy, https.proxy, socksProxy, etc.) is performed.
• In the case that the JVM properties don't exist, a search from java.home/lib/net.properties is performed.
• In the case that java.net.useSystemProxies is set to True, a search from the SystemProxy is performed.
• In Windows only, an attempt is made to retrieve these properties from the Internet Options in the registry.

To connect to an HTTP proxy, see ProxyServer. For other proxies, such as SOCKS or tunneling, see FirewallType.

ProxyServer

Data Type

string

Default Value

""

Remarks

The hostname or IP address of a proxy to route HTTP traffic through. The driver can use the HTTP, Windows (NTLM), or Kerberos authentication types to authenticate to an HTTP proxy.

If you need to connect through a SOCKS proxy or tunnel the connection, see FirewallType.

By default, the driver uses the system proxy. If you need to use another proxy, set ProxyAutoDetect to false.

ProxyPort

Data Type

int

Default Value

80

Remarks

The port the HTTP proxy is running on that you want to redirect HTTP traffic through. Specify the HTTP proxy in ProxyServer. For other proxy types, see FirewallType.

ProxyAuthScheme

Data Type

string

Default Value

"BASIC"

Remarks

This value specifies the authentication type to use to authenticate to the HTTP proxy specified by ProxyServer and ProxyPort.

Note that the driver will use the system proxy settings by default, without further configuration needed; if you want to connect to another proxy, you will need to set ProxyAutoDetect to false, in addition to ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

The authentication type can be one of the following:

• BASIC: The driver performs HTTP BASIC authentication.
• DIGEST: The driver performs HTTP DIGEST authentication.
• NEGOTIATE: The driver retrieves an NTLM or Kerberos token based on the applicable protocol for authentication.
• PROPRIETARY: The driver does not generate an NTLM or Kerberos token. You must supply this token in the Authorization header of the HTTP request.

If you need to use another authentication type, such as SOCKS 5 authentication, see FirewallType.

ProxyUser

Data Type

string

Default Value

""

Remarks

The ProxyUser and ProxyPassword options are used to connect and authenticate against the HTTP proxy specified in ProxyServer.

You can select one of the available authentication types in ProxyAuthScheme. If you are using HTTP authentication, set this to the user name of a user recognized by the HTTP proxy. If you are using Windows or Kerberos authentication, set this property to a user name in one of the following formats:

user@domain

domain\user

ProxyPassword

Data Type

string

Default Value

""

Remarks

This property is used to authenticate to an HTTP proxy server that supports NTLM (Windows), Kerberos, or HTTP authentication. To specify the HTTP proxy, you can set ProxyServer and ProxyPort. To specify the authentication type, set ProxyAuthScheme.

If you are using HTTP authentication, additionally set ProxyUser and ProxyPassword to HTTP proxy.

If you are using NTLM authentication, set ProxyUser and ProxyPassword to your Windows password. You may also need these to complete Kerberos authentication.

For SOCKS 5 authentication or tunneling, see FirewallType.

By default, the driver uses the system proxy. If you want to connect to another proxy, set ProxyAutoDetect to false.

ProxySSLType

Data Type

string

Default Value

"AUTO"

Remarks

This property determines when to use SSL for the connection to an HTTP proxy specified by ProxyServer. This value can be AUTO, ALWAYS, NEVER, or TUNNEL. The applicable values are the following:

AUTO	Default setting. If the URL is an HTTPS URL, the driver will use the TUNNEL option. If the URL is an HTTP URL, the component will use the NEVER option.
ALWAYS	The connection is always SSL enabled.
NEVER	The connection is not SSL enabled.
TUNNEL	The connection is through a tunneling proxy. The proxy server opens a connection to the remote host and traffic flows back and forth through the proxy.

ProxyExceptions

Data Type

string

Default Value

""

Remarks

The ProxyServer is used for all addresses, except for addresses defined in this property. Use semicolons to separate entries.

Note that the driver uses the system proxy settings by default, without further configuration needed; if you want to explicitly configure proxy exceptions for this connection, you need to set ProxyAutoDetect = false, and configure ProxyServer and ProxyPort. To authenticate, set ProxyAuthScheme and set ProxyUser and ProxyPassword, if needed.

Logfile

Data Type

string

Default Value

""

Remarks

Once this property is set, the driver will populate the log file as it carries out various tasks, such as when authentication is performed or queries are executed. If the specified file doesn't already exist, it will be created.

Connection strings and version information are also logged, though connection properties containing sensitive information are masked automatically.

If a relative filepath is supplied, the location of the log file will be resolved based on the path found in the Location connection property.

For more control over what is written to the log file, you can adjust the Verbosity property.

Log contents are categorized into several modules. You can show/hide individual modules using the LogModules property.

To edit the maximum size of a single logfile before a new one is created, see MaxLogFileSize.

If you would like to place a cap on the number of logfiles generated, use MaxLogFileCount.

Java Logging

Java logging is also supported. To enable Java logging, set Logfile to:

Logfile=JAVALOG://myloggername

As in the above sample, JAVALOG:// is a required prefix to use Java logging, and you will substitute your own Logger.

The supplied Logger's getLogger method is then called, using the supplied value to create the Logger instance. If a logging instance already exists, it will reference the existing instance.

When Java logging is enabled, the Verbosity will now correspond to specific logging levels.

Verbosity

Data Type

string

Default Value

"1"

Remarks

The verbosity level determines the amount of detail that the driver reports to the Logfile. Verbosity levels from 1 to 5 are supported. These are detailed in the Logging page.

LogModules

Data Type

string

Default Value

""

Remarks

Only the modules specified (separated by ';') will be included in the log file. By default all modules are included.

See the Logging page for an overview.

MaxLogFileSize

Data Type

string

Default Value

"100MB"

Remarks

When the limit is hit, a new log is created in the same folder with the date and time appended to the end. The default limit is 100 MB. Values lower than 100 kB will use 100 kB as the value instead.

Adjust the maximum number of logfiles generated with MaxLogFileCount.

MaxLogFileCount

Data Type

int

Default Value

-1

Remarks

When the limit is hit, a new log is created in the same folder with the date and time appended to the end and the oldest log file will be deleted.

The minimum supported value is 2. A value of 0 or a negative value indicates no limit on the count.

Adjust the maximum size of the logfiles generated with MaxLogFileSize.

Location

Data Type

string

Default Value

"%APPDATA%\\CData\\AmazonDynamoDB Data Provider\\Schema"

Remarks

The path to a directory which contains the schema files for the driver (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\CData\\AmazonDynamoDB Data Provider\\Schema" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Mac	~/Library/Application Support
Linux	~/.config

BrowsableSchemas

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the driver.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the driver.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

AutoCache

Data Type

bool

Default Value

false

Remarks

When AutoCache = true, the driver automatically maintains a cache of your table's data in the database of your choice.

Setting the Caching Database

When AutoCache = true, the driver caches to a simple, file-based cache. You can configure its location or cache to a different database with the following properties:

• CacheLocation: Specifies the path to the file store.
• CacheDriver and CacheConnection: Specifies a driver to a database and the connection string.

See Also

• CacheMetadata: This property reduces the amount of metadata that crosses the network by persisting table schemas retrieved from the Amazon DynamoDB metadata. Metadata then needs to be retrieved only once instead of every connection.
• Explicitly Caching Data: This section provides more examples of using AutoCache in Offline mode.
• CACHE Statements: You can use the CACHE statement to persist any SELECT query, as well as manage the cache; for example, refreshing schemas.

CacheDriver

Data Type

string

Default Value

""

Remarks

You can cache to any database for which you have a JDBC driver, including CData JDBC drivers.

The cache database is determined based on the CacheDriver and CacheConnection properties. The CacheDriver is the name of the JDBC driver class that you want to use to cache data.

Note that you must also add the CacheDriver JAR file to the classpath.

The following examples show how to cache to several major databases. Refer to CacheConnection for more information on the JDBC URL syntax and typical connection properties.

Derby and Java DB

The driver simplifies Derby configuration. Java DB is the Oracle distribution of Derby. The JAR file is shipped in the JDK. You can find the JAR file, derby.jar, in the db subfolder of the JDK installation. In most caching scenarios, you need to specify only the following, after adding derby.jar to the classpath:

jdbc:amazondynamodb:CacheLocation='c:/Temp/cachedir';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

To customize the Derby JDBC URL, use CacheDriver and CacheConnection. For example, to cache to an in-memory database, use a JDBC URL like the following:

jdbc:amazondynamodb:CacheDriver=org.apache.derby.jdbc.EmbeddedDriver;CacheConnection='jdbc:derby:memory';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

SQLite

The following is a JDBC URL for the SQLite JDBC driver:

jdbc:amazondynamodb:CacheDriver=org.sqlite.JDBC;CacheConnection='jdbc:sqlite:C:/Temp/sqlite.db';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

MySQL

The following is a JDBC URL for the included CData JDBC Driver for MySQL:

  jdbc:amazondynamodb:Cache Driver=cdata.jdbc.mysql.MySQLDriver;Cache Connection='jdbc:mysql:Server=localhost;Port=3306;Database=cache;User=root;Password=123456';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

  

SQL Server

The following JDBC URL uses the Microsoft JDBC Driver for SQL Server:

jdbc:amazondynamodb:Cache Driver=com.microsoft.sqlserver.jdbc.SQLServerDriver;Cache Connection='jdbc:sqlserver://localhost\sqlexpress:7437;user=sa;password=123456;databaseName=Cache';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

Oracle

The following is a JDBC URL for the Oracle Thin Client:

jdbc:amazondynamodb:Cache Driver=oracle.jdbc.OracleDriver;CacheConnection='jdbc:oracle:thin:scott/tiger@localhost:1521:orcldb';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

NOTE: If using a version of Oracle older than 9i, the cache driver will instead be oracle.jdbc.driver.OracleDriver .

PostgreSQL

The following JDBC URL uses the official PostgreSQL JDBC driver:

jdbc:amazondynamodb:CacheDriver=cdata.jdbc.postgresql.PostgreSQLDriver;CacheConnection='jdbc:postgresql:User=postgres;Password=admin;Database=postgres;Server=localhost;Port=5432;';AWS Access Key=xxx;AWS Secret Key=xxx;Domain=amazonaws.com;AWS Region=OREGON;

CacheConnection

Data Type

string

Default Value

""

Remarks

The cache database is determined based on the CacheDriver and CacheConnection properties. Both properties are required to use the cache database. Examples of common cache database settings can be found below. For more information on setting the caching database's driver, refer to CacheDriver.

The connection string specified in the CacheConnection property is passed directly to the underlying CacheDriver. Consult the documentation for the specific JDBC driver for more information on the available properties. Make sure to include the JDBC driver in your application's classpath.

Derby and Java DB

The driver simplifies caching to Derby, only requiring you to set the CacheLocation property to make a basic connection.

Alternatively, you can configure the connection to Derby manually using CacheDriver and CacheConnection. The following is the Derby JDBC URL syntax:

jdbc:derby:[subsubprotocol:][databaseName][;attribute=value[;attribute=value] ... ]

For example, to cache to an in-memory database, use the following:

jdbc:derby:memory

SQLite

To cache to SQLite, you can use the SQLite JDBC driver. The following is the syntax of the JDBC URL:

jdbc:sqlite:dataSource

• Data Source: The path to an SQLite database file. Or, use a value of :memory to cache in memory.

MySQL

The installation includes the CData JDBC Driver for MySQL. The following is an example JDBC URL:

jdbc:mysql:User=root;Password=root;Server=localhost;Port=3306;Database=cache

The following are typical connection properties:

• Server: The IP address or domain name of the server you want to connect to.
• Port: The port that the server is running on.
• User: The user name provided for authentication to the database.
• Password: The password provided for authentication to the database.
• Database: The name of the database.

SQL Server

The JDBC URL for the Microsoft JDBC Driver for SQL Server has the following syntax:

jdbc:sqlserver://[serverName[\instance][:port]][;database=databaseName][;property=value[;property=value] ... ]

For example:

jdbc:sqlserver://localhost\sqlexpress:1433;integratedSecurity=true

The following are typical SQL Server connection properties:

• Server: The name or network address of the computer running SQL Server. To connect to a named instance instead of the default instance, this property can be used to specify the host name and the instance, separated by a backslash.
• Port: The port SQL Server is running on.
• Database: The name of the SQL Server database.
• Integrated Security: Set this option to true to use the current Windows account for authentication. Set this option to false if you are setting the User and Password in the connection.

  To use integrated security, you will also need to add sqljdbc_auth.dll to a folder on the Windows system path. This file is located in the auth subfolder of the Microsoft JDBC Driver for SQL Server installation. The bitness of the assembly must match the bitness of your JVM.

• User Id: The user name provided for authentication with SQL Server. This property is only needed if you are not using integrated security.
• Password: The password provided for authentication with SQL Server. This property is only needed if you are not using integrated security.

Oracle

The following is the conventional JDBC URL syntax for the Oracle JDBC Thin driver:

jdbc:oracle:thin:[userId/password]@[//]host[[:port][:sid]]

For example:

jdbc:oracle:thin:scott/tiger@myhost:1521:orcl

The following are typical connection properties:

• Data Source: The connect descriptor that identifies the Oracle database. This can be a TNS connect descriptor, an Oracle Net Services name that resolves to a connect descriptor, or, after version 11g, an Easy Connect naming (the host name of the Oracle server with an optional port and service name).

• Password: The password provided for authentication with the Oracle database.
• User Id: The user Id provided for authentication with the Oracle database.

PostgreSQL

The following is the JDBC URL syntax for the official PostgreSQL JDBC driver:

jdbc:postgresql:[//[host[:port]]/]database[[?option=value][[&option=value][&option=value] ... ]]

For example, the following connection string connects to a database on the default host (localhost) and port (5432):

jdbc:postgresql:postgres

The following are typical connection properties:

• Host: The address of the server hosting the PostgreSQL database.
• Port: The port used to connect to the server hosting the PostgreSQL database.
• Database: The name of the database.
• User name: The user Id provided for authentication with the PostgreSQL database. You can specify this in the JDBC URL with the "user" parameter.
• Password: The password provided for authentication with the PostgreSQL database.

CacheLocation

Data Type

string

Default Value

"%APPDATA%\\CData\\AmazonDynamoDB Data Provider"

Remarks

The CacheLocation is a simple, file-based cache. The driver uses Java DB, Oracle's distribution of the Derby database. To cache to Java DB, you will need to add the Java DB JAR file to the classpath. The JAR file, derby.jar, is shipped in the JDK and located in the db subfolder of the JDK installation.

If left unspecified, the default location is "%APPDATA%\\CData\\AmazonDynamoDB Data Provider" with %APPDATA% being set to the user's configuration directory:

Platform	%APPDATA%
Windows	The value of the APPDATA environment variable
Mac	~/Library/Application Support
Linux	~/.config

See Also

• AutoCache: Set to implicitly create and maintain a cache for later offline use.
• CacheMetadata: Set to persist the Amazon DynamoDB catalog in CacheLocation.

CacheTolerance

Data Type

int

Default Value

600

Remarks

The tolerance for stale data in the cache specified in seconds. This only applies when AutoCache is used. The driver checks with the data source for newer records after the tolerance interval has expired. Otherwise, it returns the data directly from the cache.

Offline

Data Type

bool

Default Value

false

Remarks

When Offline = true, all queries execute against the cache as opposed to the live data source. In this mode, certain queries like INSERT, UPDATE, DELETE, and CACHE are not allowed.

CacheMetadata

Data Type

bool

Default Value

false

Remarks

As you execute queries with this property set, table metadata in the Amazon DynamoDB catalog are cached to the file store specified by CacheLocation if set or the user's home directory otherwise. A table's metadata will be retrieved only once, when the table is queried for the first time.

When to Use CacheMetadata

The driver automatically persists metadata in memory for up to two hours when you first discover the metadata for a table or view and therefore, CacheMetadata is generally not required. CacheMetadata becomes useful when metadata operations are expensive such as when you are working with large amounts of metadata or when you have many short-lived connections.

When Not to Use CacheMetadata

• When you are working with volatile metadata: Metadata for a table is only retrieved the first time the connection to the table is made. To pick up new, changed, or deleted columns, you would need to delete and rebuild the metadata cache. Therefore, it is best to rely on the in-memory caching for cases where metadata changes often.
• When you are caching to a database: CacheMetadata can only be used with CacheLocation. If you are caching to another database with the CacheDriver and CacheConnection properties, use AutoCache to cache implicitly. Or, use CACHE Statements to cache explicitly.

AutoDetectIndex

Data Type

bool

Default Value

true

Remarks

In DynamoDB, secondary indexes can be used to more quickly select data from a given table. By default, we attempt to automatically detect an index to use based on the query criteria. However, this may not always be desirable. To turn off index detecting logic, simply set the property to false or if you have control over the query and would prefer to specify the index yourself, simply use the SecondaryIndexName pseudo column to specify which index to use (if any).

BatchSize

Data Type

int

Default Value

0

Remarks

When BatchSize is set to a value greater than 0, the batch operation will split the entire batch into separate batches of size BatchSize. The split batches will then be submitted to the server individually. This is useful when the server has limitations on the size of the request that can be submitted.

Setting BatchSize to 0 will submit the entire batch as specified.

ConnectionLifeTime

Data Type

int

Default Value

0

Remarks

The maximum lifetime of a connection in seconds. Once the time has elapsed, the connection object is disposed. The default is 0 which indicates there is no limit to the connection lifetime.

ConnectOnOpen

Data Type

bool

Default Value

false

Remarks

When set to true, a connection will be made to Amazon DynamoDB when the connection is opened. This property enables the Test Connection feature available in various database tools.

This feature acts as a NOOP command as it is used to verify a connection can be made to Amazon DynamoDB and nothing from this initial connection is maintained.

Setting this property to false may provide performance improvements (depending upon the number of times a connection is opened).

FlattenArrays

Data Type

string

Default Value

""

Remarks

By default, nested arrays are returned as strings of JSON. The FlattenArrays property can be used to flatten the elements of nested arrays into columns of their own. This is only recommended for arrays that are expected to be short.

Set FlattenArrays to the number of elements you want to return from nested arrays. The specified elements are returned as columns. The zero-based index is concatenated to the column name. Other elements are ignored.

For example, you can return an arbitrary number of elements from an array of strings:

["FLOW-MATIC","LISP","COBOL"]

When FlattenArrays is set to 1, the preceding array is flattened into the following table:

Column Name	Column Value
languages_0	FLOW-MATIC

FlattenObjects

Data Type

bool

Default Value

true

Remarks

Set FlattenObjects to true to flatten object properties into columns of their own. Otherwise, objects nested in arrays are returned as strings of JSON. The property name is concatenated onto the object name with an underscore to generate the column name.

For example, you can flatten the nested objects below at connection time:

[

     { "grade": "A", "score": 2 },

     { "grade": "A", "score": 6 },

     { "grade": "A", "score": 10 },

     { "grade": "A", "score": 9 },

     { "grade": "B", "score": 14 }

]

When FlattenObjects is set to true and FlattenArrays is set to 1, the preceding array is flattened into the following table:

Column Name	Column Value
grades_0_grade	A
grades_0_score	2

FlexibleSchema

Data Type

bool

Default Value

true

Remarks

Set FlexibleSchema to true to scan for additional metadata on the query result set. Otherwise, the metadata will remain the same.

GenerateSchemaFiles

Data Type

string

Default Value

"Never"

Remarks

This property outputs schemas to .rsd files in the path specified by Location.

Available settings are the following:

• Never: A schema file will never be generated.
• OnUse: A schema file will be generated the first time a table is referenced, provided the schema file for the table does not already exist.
• OnStart: A schema file will be generated at connection time for any tables that do not currently have a schema file.
• OnCreate: A schema file will be generated by when running a CREATE TABLE SQL query.

Note that if you want to regenerate a file, you will first need to delete it.

Generate Schemas with SQL

When you set GenerateSchemaFiles to OnUse, the driver generates schemas as you execute SELECT queries. Schemas are generated for each table referenced in the query.

When you set GenerateSchemaFiles to OnCreate, schemas are only generated when a CREATE TABLE query is executed.

Generate Schemas on Connection

Another way to use this property is to obtain schemas for every table in your database when you connect. To do so, set GenerateSchemaFiles to OnStart and connect.

IgnoreTypes

Data Type

string

Default Value

"Datetime,Date,Time"

Remarks

Removes support for the specified types. For example, Time. These types will then be reported as strings instead.

MaximumRequestRetries

Data Type

string

Default Value

"4"

Remarks

MaximumRequestRetries is the maximum number of times the driver will retry a request when the problem has been detected as temporary (errors like "unknown error", network issues, and exceeding the maximum threshold per table). In this case on the first retry the driver will back off and wait for the amount of time designated by RetryWaitTime. If that request fails, the driver will double the time and then double again until the driver has exhausted the available retries.

For example, if RetryWaitTime is set to 2 seconds and MaximumRequestRetries is set to 5, the wait times will be as follows: 0 -> 2 -> 4 -> 8 -> 16 -> 32.

MaxRows

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Other

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Caching Configuration

CachePartial=True	Caches only a subset of columns, which you can specify in your query.
QueryPassthrough=True	Passes the specified query to the cache database instead of using the SQL parser of the driver.

Integration and Formatting

DefaultColumnSize	Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT	Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename	Records the underlying socket data transfer to the specified file.

Pagesize

Data Type

int

Default Value

2000

Remarks

The Pagesize property affects the maximum number of results to return per page from Amazon DynamoDB. By default this property has the value '-1' which indicates that the provider will try to get all the records without per page limit.

PoolIdleTimeout

Data Type

int

Default Value

60

Remarks

The allowed idle time a connection can remain in the pool until the connection is closed. The default is 60 seconds.

PoolMaxSize

Data Type

int

Default Value

100

Remarks

The maximum connections in the pool. The default is 100. To disable this property, set the property value to 0 or less.

PoolMinSize

Data Type

int

Default Value

1

Remarks

The minimum number of connections in the pool. The default is 1.

PoolWaitTime

Data Type

int

Default Value

60

Remarks

The max seconds to wait for a connection to become available. If a new connection request is waiting for an available connection and exceeds this time, an error is thrown. By default, new requests wait forever for an available connection.

PseudoColumns

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Readonly

Data Type

bool

Default Value

false

Remarks

If this property is set to true, the driver will allow only SELECT queries. INSERT, UPDATE, DELETE, and stored procedure queries will cause an error to be thrown.

RetryWaitTime

Data Type

string

Default Value

"2000"

Remarks

The value of this property is doubled on every retry to determine how long to wait until the next retry. Specify the maximum number of retries with MaximumRequestRetries.

RowScanDepth

Data Type

int

Default Value

50

Remarks

The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

RTK

Data Type

string

Default Value

""

Remarks

The RTK property may be used to license a build. See the included licensing file to see how to set this property. The runtime key is only available if you purchased an OEM license.

SeparatorCharacter

Data Type

string

Default Value

"."

Remarks

In order to flatten out structures such as Maps and List attributes in DynamoDB, we need some specifier that states what the separation is between those columns and other columns. If this value is "." and a column comes back with the name address.city, this indicates that there is a mapped attribute with a child called city. If your data has columns that already use a single period within the attribute name, set the SeparatorCharacter to a different character or characters.

SupportEnhancedSQL

Data Type

bool

Default Value

true

Remarks

Use QueryCache to cache memory for a given time in seconds or to disable in-memory caching.

When SupportEnhancedSQL = true, the driver offloads as much of the SELECT statement processing as possible to Amazon DynamoDB and then processes the rest of the query in memory. In this way, the driver can execute unsupported predicates, joins, and aggregation.

When SupportEnhancedSQL = false, the driver limits SQL execution to what is supported by the Amazon DynamoDB API.

Execution of Predicates

The driver determines which of the clauses are supported by the data source and then pushes them to the source to get the smallest superset of rows that would satisfy the query. It then filters the rest of the rows locally. The filter operation is streamed, which enables the driver to filter effectively for even very large datasets.

Execution of Joins

The driver uses various techniques to join in memory. The driver trades off memory utilization against the requirement of reading the same table more than once.

Execution of Aggregates

The driver retrieves all rows necessary to process the aggregation in memory.

ThreadCount

Data Type

string

Default Value

"4"

Remarks

Parallel scans allow data to be retrieved faster by splitting up the retrieval process across multiple threads. This can greatly improve performance when scanning data in Amazon DynamoDB. However, this will also consume your read units for a table much faster than a single thread. Consider your available cores, bandwidth, and read units for your tables before increasing the ThreadCount.

Timeout

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the driver throws an exception.

TypeDetectionScheme

Data Type

string

Default Value

"RowScan"

Remarks

None	Setting TypeDetectionScheme to None will return all columns as string type. Note: Even when set to None, the column names will still be scanned when Header=True.
RowScan	Setting TypeDetectionScheme to RowScan will scan rows to heuristically determine the data type. The RowScanDepth determines the number of rows to be scanned. If no value is specified, RowScan will be used by default.

UseBatchWriteItemOperation

Data Type

bool

Default Value

false

Remarks

When enabled the provider will use BatchWriteItem operation for handling updates and inserts. By default, the provider uses ExecuteStatement/BatchExecuteStatement operation. You need to enable BatchWriteItem only when inserting/updating binary/binary-set data. ExecuteStatement/BatchExecuteStatement doesn't support manipulating binary fields.

UseConnectionPooling

Data Type

bool

Default Value

false

Remarks

This property enables connection pooling. The default is false. See Connection Pooling for information on using connection pools.

UseConsistentReads

Data Type

bool

Default Value

false

Remarks

This parameter is not supported on global secondary indexes. If you scan or query using a secondary index, Constistent Reads will not be used even if the property is set to true.

UseSimpleNames

Data Type

bool

Default Value

false

Remarks

Amazon DynamoDB tables and columns can use special characters in names that are normally not allowed in standard databases. UseSimpleNames makes the driver easier to use with traditional database tools.

Setting UseSimpleNames to true will simplify the names of tables and columns returned. It will enforce a naming scheme such that only alphanumeric characters and the underscore are valid for the displayed table and column names. Any nonalphanumeric characters will be converted to an underscore.